Rhodes flow-mon Flow Rate Indicators with Switches

03/07/2006

Rhodes flow-mon Flow Rate Indicators with Switches

Rhodes are pleased to introduce a new range of Flow Rate Indicators to supplment the already comprehensive range of Sight Glasses and Flow Indicator products. The 'flow-mon' units are manufactured in a wide range of sizes and specification options but all have the same basic function. Medium Screwed Unit A dial and mechanical indicator continuously monitor the flow rate at any given time whilst electrical switches can be specified to signal when a particular level has been reached during increasing or decreasing flow rates. Switches are field adjustable over the full range.

Principle Features & Benefits:

All metal construction - no tubes of glass or plastic to break.
Spring loaded mechanical design - requires no straight pipe run and not affected by orientation.
Limited movement on internal parts - minimal wear and down time.
Modular design - reduces maintenance costs, down time, and production loss.
Direct indication & field adjustable switch(es) - monitors critical flows and provides alarm(s).
1% of rate repeatable switch set point - accurate & reliable through all operation cycles.
Weatherproof enclosure box to IP65 (Nema 4).
Flow through design - minimal pressure loss.
Individually calibrated to customer specification - ensures accuracy.
Adjustable under operating conditions.
Scale is in units (e.g litres/minute).
Large range of body materials available.
Size range from 8mm (Ľ") to 200mm (8").
May be installed in any position.
Orientation of enclosure box easily changed.
High switch rating - 15 Amps.
ATEX approved Explosion-proof models available.
Will pass twice the maximum indicated flow.
Acts as non-return valve.